Standard Horizon RAM3+ Remote Access Microphone (CMP31)

The Standard RAM3+ Remote Station Microphone replaces the RAM3 and is supplied with a longer microphone cable and louder audio speaker.

The "curly cord" was increased from 350 mm to 615 mm, or 75% longer before stretching!

The volume has also been increased by adding a 1W speaker and increasing the sound pressure, doubling the audio output.

The RAM3+ allows you to remotely control all functions of a compatible Standard Horizon fixed mount VHF radio, which includes the Standard GX1600, GX1700, GX2000, GX2100, GX2150, GX2200 and GX5500S Quantum models.

The full dot matrix display and programmable keys make operation simple and fast.

Features include turning the VHF on/off, and all DSC functions including Distress.

Depending on the features of the VHF radio connected; the RAM 3+ can show AIS target, GPS, Waypoint, Vessel position COG & SOG information, and Intercom functions that allow communications between the main radio and the remote station (radio feature dependent).

• AF Output:
  • Internal Speaker: 800mW @ 8 Ohms for 10% THD
  • External Speaker: 3W @ 4 Ohms for 10% THD
• 61" Curly Cord
• Remotely control all Radio, DSC, PA/Fog* functions of connected Standard Horizon VHF
• Intercom function** between RAM 3+ and connected radio, and between RAM3+ to RAM3+
• Speaker Microphone with Noise Cancelling Clear Voice Technology
• Full Dot-matrix LCD display
• Three (3) user-programmable soft keys
• Supplied with 23' of routing cable & waterproof panel mount connector. (Can be extended up to 70 feet with optional CT-100 (23 ft) extension cables)
• External speaker wires available at RAM 3 routing cable connection
• IPX7 Submersible 3 ft for 30 minutes
• Three-year waterproof warranty